
Hyperbaric chamber for a clinic or rehabilitation centre
We supply hyperbaric chambers to clinics, rehabilitation centres, sports medicine practices and wellness centres. We deliver monoplace models, for one person, and multiplace models, for treating several patients in the same session. The price of a hyperbaric chamber depends on the type, on the working pressure, and on whether a compressor and an oxygen supply system are included.
Every chamber reaches you with transport, assembly, test pressurisation and operator training. The conformity documentation and the user manual are handed over at installation, together with the commissioning report.
What happens in practice
Hyperbaric oxygen therapy has entered post-exercise recovery, wound-healing and wellness protocols over the last few years, and patient demand has grown faster than the number of centres offering the service. A clinic that wants to meet that demand runs into three unknowns: what working pressure it needs, how much space the complete installation occupies, and who takes care of the periodic checks.
Importing directly brings conformity problems as well. A hyperbaric chamber is pressure equipment, so the documentation and the inspections are not formalities. Without a declaration of conformity, a manual in the local language and a commissioning report, the installation cannot be used lawfully. Assembly by a supplier with no experience in high-pressure equipment remains a risk not worth accepting.
What we do
We start from the available space and from how many patients you want to treat at once, not from a catalogue. We tell you which model fits your room, what working pressure covers the protocols you sell, and how much the installation consumes. On that basis you get a quote covering the chamber, the compressor, the oxygen system, transport and assembly.
Installation, test pressurisation and operator training are included in the price. After commissioning we remain responsible for the periodic checks and for parts, with the same contact for the life of the equipment. Indications and dosing are set by the clinic's coordinating physician. We deliver the equipment, the documentation and the training.
How to choose a hyperbaric chamber
Monoplace or multiplace hyperbaric chamber
A monoplace hyperbaric chamber treats one patient per session and takes the least space. Multiplace chambers have two, three, four or five cabins in the same structure, so they treat several patients in one session with a single operator. The choice follows the number of sessions per day you plan and the space available.
Cylindrical or flat-bottomed design
Cylindrical chambers have the classic shape of a pressure vessel. Flat-bottomed models have a flat floor and a box shape, with easier patient access and an interior closer to that of a room. Both lines have steel cabin bodies.
Working pressure and oxygen
The chambers in our range work at an internal pressure of 0.1 to 0.25 MPa, that is 2 to 3.5 ATA. The cabin atmosphere is pressurised with air, with the oxygen concentration kept between 22 and 24%. Indications and dosing are set by the clinic's supervising physician.
Space and the complete installation
Besides the chamber, the installation includes the compressor and the oxygen supply system. Before the quote we tell you which model fits your room, how much floor space the complete installation takes and what power supply it needs.
Hyperbaric chambers: models we supply
The models in the portfolio that cover this direction.

Individual Hyperbaric Oxygen Chamber
Monoplace hyperbaric chamber for a single patient, from the manufacturer's Classic cylinder line. Steel body, air pressurisation, working pressure of 0.1 to 0.25 MPa (2 to 3.5 ATA), for individual hyperbaric therapy sessions.

Dual-Cabins Flat-Bottomed Hyperbaric Oxygen Chamber
Flat-bottomed hyperbaric chamber with 2 cabins and a steel body, in a cuboid shape. Air pressurisation, working pressure of 0.1 to 0.25 MPa (2 to 3.5 ATA) and customisable capacity, according to the manufacturer's specifications.

Triple-Cabins Flat-Bottomed Hyperbaric Oxygen Chamber
Flat-bottomed hyperbaric chamber with 3 cabins, positioned by the manufacturer in the High-End range. Steel body, air pressurisation, working pressure of 0.1 to 0.25 MPa (2 to 3.5 ATA) and customisable capacity, for simultaneous hyperbaric oxygenation.

4/5/Combined-Cabins Flat-Bottomed Hyperbaric Oxygen Chambers
Flat-bottomed hyperbaric chambers with 4 cabins, 5 cabins or a combined configuration, from the manufacturer's High-End range. Steel body, air pressurisation, working pressure of 0.1 to 0.25 MPa (2 to 3.5 ATA), for hyperbaric oxygen therapy centres with high patient flow.

Dual-Cabins Cylinder Model Hyperbaric Oxygen Chamber
Cylinder model hyperbaric chamber with 2 cabins, from the manufacturer's Classic line, for hyperbaric oxygen therapy. Steel body, air pressurisation, working pressure of 0.1 to 0.25 MPa (2 to 3.5 ATA) and customisable capacity.

Triple-Cabins Cylinder Model Hyperbaric Oxygen Chamber
Cylinder model hyperbaric chamber with 3 cabins, from the manufacturer's Classic line. Steel body, air pressurisation, working pressure of 0.1 to 0.25 MPa (2 to 3.5 ATA) and customisable capacity, for centres with several treatment rooms.
Hyperbaric chambers: frequently asked questions
How much does a hyperbaric chamber cost?
The price of a hyperbaric chamber depends on the type, monoplace or multiplace, the number of cabins, the working pressure and whether it includes the compressor and oxygen system. You receive the full price, with transport and assembly included.
What is a multiplace hyperbaric chamber?
It is a chamber with two or more cabins in the same structure, in which several patients are treated in one session. We supply configurations with 2, 3, 4 or 5 cabins, cylindrical or flat-bottomed.
What pressure do your hyperbaric chambers work at?
The internal pressure is 0.1 to 0.25 MPa, that is 2 to 3.5 ATA, according to the manufacturer's specifications.
Are assembly and training included in the price?
Yes. Transport, assembly, the test pressurisation and operator training are included. The conformity documentation and the manual are handed over at installation.
Who carries out the periodic inspections?
After commissioning we remain responsible for periodic inspections and parts, with the same contact for as long as the chamber is in use.
See also
- GuideHyperbaric oxygen therapyHow it works, what it treats, how sessions run and how to choose between monoplace and multiplace.
- Physiotherapy and medical rehabilitation equipmentComplete equipment for physiotherapy practices and rehabilitation centres
- Body sculpting and body contouring machines for salons and clinicsBody sculpting machines: cryolipolysis, cavitation, radiofrequency, vacuum and EMS