Updated: October 21, 2026
A guide for salons and clinics: body contouring by controlled cooling of fat, treatment areas, number of sessions, published results, contraindications and the criteria for choosing a machine.
In short
- Fat cells are more sensitive to cold than skin. Controlled cooling triggers their programmed death, and the body clears them over the following weeks.
- Fat freezing contours areas of localised fat. Body weight changes little, so the treatment suits people close to their target weight.
- Results appear after 1 to 2 months and are assessed at about 3 months.
- Usually 1 to 3 sessions per area, 6 to 8 weeks apart.
- On the machine, what counts is applicator shape, how many handpieces work at once and the membrane cost per application.
How fat freezing works
Cryolipolysis comes from research published by Manstein, Anderson and colleagues in 2008 at Massachusetts General Hospital: fat cells are more sensitive to cold than the cells of the skin and surrounding tissue. When cooled in a controlled way, they undergo apoptosis, programmed cell death. Macrophages clear them gradually in the weeks after the session.
The machine draws the fat fold into the applicator with vacuum and cools it to a set temperature for a fixed time. A membrane with anti-freeze gel protects the skin throughout the application.
In 2010 the FDA cleared cryolipolysis for the flanks. Clearance later extended to other areas, including the abdomen, thighs and submental area.
Fat freezing treatment areas
- Abdomen and flanks.
- Back and bra line.
- Arms.
- Inner and outer thighs.
- Knees.
- The submental area, the double chin.
Each area has its own applicator. A large applicator covers the abdomen, while the chin and knees, where the fat fold is small, use small dedicated applicators.
Does fat freezing work: the results
The effect builds gradually. First changes show after 1 to 2 months, and the result is assessed at about 3 months, once the body has cleared the treated fat cells.
A systematic review published in 2015 in Plastic and Reconstructive Surgery (Ingargiola et al., 19 studies) found average fat layer reductions in the treated area of 10.3% to 25.5% measured by ultrasound and 14.67% to 28.5% measured by calipers.
The same review reported mild, short-lived side effects and no changes in blood lipids or liver function tests.
Who fat freezing is for
Fat freezing treats fat deposits that can be pinched into a fold. Body weight changes little after treatment, which is why it suits people close to their target weight. Weight loss remains a matter of diet, exercise and, where needed, a doctor.
- Localised fat that can be pinched between the fingers.
- Stable weight.
- Good skin elasticity.
- Realistic expectations: contouring one area.
How many fat freezing sessions are needed
Usually 1 to 3 sessions per area, 6 to 8 weeks apart. One application takes 35 to 60 minutes, depending on the machine and applicator.
Machines with several handpieces treat several areas in one appointment. COOL 360° has four independent handpieces, so four areas on one client or four clients in parallel.
Do you run a salon, clinic or rehabilitation centre?
Tell us which treatments you want to offer and how many clients you see a day. We come back with the right model, the full price and what the delivery includes.
Side effects and contraindications
Side effects
- Redness and a firm feel in the area straight after the application.
- Numbness, tingling or tenderness, which can last a few weeks.
- Bruising, from the vacuum.
- Rarely: paradoxical adipose hyperplasia, an increase of fat tissue in the treated area.
Contraindications
- Cryoglobulinaemia, cold agglutinin disease and paroxysmal cold haemoglobinuria.
- A hernia in or near the treated area.
- Pregnancy and breastfeeding.
- Wounds, infection or impaired sensation in the area.
- Raynaud's syndrome, after a doctor's assessment.
What to look for in a fat freezing machine
- Applicator shape: 360° circumferential cooling surrounds the whole fold, while two-plate systems cool only two sides of it.
- Applicator sizes for large, medium and small areas, including the chin.
- How many handpieces work at once, each with its own settings.
- Temperature range and its control during the application.
- Temperature sensors and automatic cut-off.
- Anti-freeze membrane cost per application.
- CE marking, declaration of conformity, service and protocol training.

Professional cryolipolysis machine with 360° circumferential cooling, temperature controlled between -10 and +10 °C and four independent handpieces, with 10 applicator sizes. Treats four areas or four clients at the same time, without consumables.

A 2 in 1 platform that combines 360° cryolipolysis, with cooling between -10 and +5 °C, and electromagnetic muscle stimulation, with supramaximal contractions. Fat reduction and muscle toning with a single piece of equipment.
COOL 360° cools between -10 and +10 °C and has four independent handpieces and 10 applicator sizes. EM+360° COOL combines fat freezing with electromagnetic muscle stimulation, for fat reduction and toning on one platform.
Fat freezing on your treatment menu
Fat freezing is sold per area and as area packages. The business case rests on the membrane cost per application, the application time and how many applications the machine runs in parallel.
In the same clinic, fat freezing pairs with HIFU for skin firmness and with TECAR therapy for drainage and contouring. All body contouring machines are on the body sculpting machines page.
The Zeqira quote lists the machine, delivery, installation, protocol training and the consumable cost per application.
Do you run a salon, clinic or rehabilitation centre?
Tell us which treatments you want to offer and how many clients you see a day. We come back with the right model, the full price and what the delivery includes.
Frequently asked questions
Does freezing your fat really work?
Yes, on localised fat. A 2015 systematic review of 19 studies (Ingargiola et al.) found average fat layer reductions of 10.3% to 25.5% by ultrasound and 14.67% to 28.5% by calipers in the treated area.
Where does the fat go after fat freezing?
The cooled fat cells undergo programmed cell death. Macrophages clear them gradually and the body processes the contents over the following weeks.
How many sessions of fat freezing do I need?
Usually 1 to 3 sessions per area, 6 to 8 weeks apart.
What are the disadvantages of fat freezing?
Results take 2 to 3 months to show, weight changes little, and temporary numbness, tenderness and bruising are common. Paradoxical adipose hyperplasia is a rare side effect.
Who should not have fat freezing?
People with cryoglobulinaemia, cold agglutinin disease, paroxysmal cold haemoglobinuria, a hernia in the area, or who are pregnant or breastfeeding.
Is fat freezing a weight loss treatment?
Fat freezing reduces fat in the treated area and contours it. Body weight changes little, so it suits people close to their target weight.
How much does a professional fat freezing machine cost?
The price depends on the number of handpieces, applicator sizes and the technologies included. We send the full price with delivery, installation, training and the membrane cost per application.
Get a quote for the right machine
The quote covers the machine, delivery, installation, protocol training and the consumable cost per session. We work with companies, salons, clinics and hospitals.

